BEC Box for Fixed wing

BEC Box for Fixed wing

Ücretsiz STL Düzenleyici ve Saklama
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Vented BEC box for fixed wing drone. Version 3 (FW3) Fixed Hole spacing and improved overall design. Added vents on the underside to let air more places for better cooling. (UPDATE: Somehow I accidentally scaled the holes for the bolts so it works now but doesn't hold the nuts tight.) Version 2: (FW2) JUNK! Holes are off don't waste time with this one! Beefed up the floor and overall height of the box. Also put it on a base to bolt it to the underside of the Pixhawk 2 Cube in a fixed wing drone, if you have the space for it. Version 1:(FW1) The floor of the box is too thin. well it will work but I think its thin.

Bu model hakkında

BEC Box for Fixed wing, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller