Solenoid Cage for Worker Swordfish

Açıklama

This is a solenoid pusher assembly for the Worker Swordfish. One cage assembly is compatible with the Flywheel The World solenoid (google them to get one). The other cage assembly is compatible with the generic 35mm solenoid that is out there on aliexpress/ebay/etc. This has also been tested to work fine. Please print the corresponding pusher nub for each solenoid. Compatibility with other solenoids is not guaranteed or implied. WARNING This is a one-way deal. If you start to install this, you're not going back. Make sure you have all the necessary expertise, tooling, and parts ready to go. You will lose a good portion of your battery bay, so I would suggest using a stock mount battery. Video of Solenoid Blaster in Action https://youtu.be/pT_aiZbrsOY (yeah, there's some cool recoil) Print Instructions The Solenoid Cage should be printed using a strong infill setting. I actually did mine at 100% with 0.1mm layer height (to ensure dimensional accuracy). The overhangs are critical, so I made sure I had a high % support, with a roof. You absolutely must get the overhangs flat. The pusher nub can be printed at 100% infill using a strong filament. I use Polymaker Polymax. 0.1mm layer height, because there is an internal thread. The template can be printed using whatever setting you want. Special considerations for the FTW solenoid By and large, this is a great solenoid, but with the following caveats: 1) Do not use on 4s. Although the coils can handle it fine, the landing pad…