Vyper Direct Drive

Açıklama

This is my first attempt at this, so be gentle. This is a direct drive mount setup for the Vyper. ITS STILL BEING TWEAKED. Vyper is Rev. B. I do not have any way to test or design for the newer versions. Unless someone can/wants to provide a mounting template. It uses an E3D V6 Hotend. The entire setup should be supported by the levelling sensor. I replaced the stock stepper motor with a 17HS4023 stepper motor. Its thinner and lighter than the original. The wiring to the stepper does need to be modified in order to get it to spin the correct direction. The modified V6 adapter is a remix of https://www.thingiverse.com/thing:4914849 by Glutt0ne. I shortened this by 3mm in order for the nozzle to line up with the air ducts better on the satsana. The modified Satsana fan duct is a remix of https://www.thingiverse.com/thing:4611837 by BobanaPirate. If you make it and it works out for you, let me know! I am in the process of test printing with this setup. Edit 9/29/21: The Extruder mount bracket may not be needed if the three bolts are replaced with 3x M3x35 bolts. The adapter should be tight enough inside of the V6 adapter. Edit 9/30/21: I plan on having an updated version of the fan duct in the next week or so to fit the stock LED. Big move at home so computer and printer are down at the moment. Edit 10/1/21: Removed the extruder bracket for now. There are a number of modifications i need to do including adding holes for the stepper motor bolts. This piece will likely be…