2020 Extrusion Corner Bracket

2020 Extrusion Corner Bracket

Ücretsiz STL Düzenleyici ve Saklama
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This design is intended to be simple take on corner brackets for printers with square frame such as the ender 5 plus. It uses M3 x 8mm screws and has a small overall footprint. The thicknesses allow for some customization, and is still strong, also no supports required. Set Top/Bottom layers to Zero if you want an infill pattern for looks inside the triangle. Set BOTH Top/Bottom AND Infill to zero if you just want to remove the center triangle all together For Strength, set walls to 4mm Infill can be set to 0%

Bu model hakkında

2020 Extrusion Corner Bracket, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller