BMW e60 e61 cup-holder

BMW e60 e61 cup-holder

Ücretsiz STL Gadget ve Aksesuar
  • 12 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Cup holder for the center console. Fits into the holder of the cell phone preparation. Remove cell phone preparation beforehand: Remove 4 screws on the underside of the cell phone preparation and dismantle everything until only the cables and the shell with joint remain. Remove the rear cigarette lighter cover. Remove the clips (2 pcs.) for the rear ventilation outlet and remove the ventilation outlet Remove the rear cover of the center armrest 2 nuts SW8 from below Remove the large flap of the center armrest (2x TX) Undo the rear screw of the adjustment unit The cell phone preparation joint is screwed on the driver's side. You can now reach this screw to some extent. Once the screw is out, the cell phone preparation can be removed. Pull the cable back into the center console. Installing the cup holder Refit everything

Bu model hakkında

BMW e60 e61 cup-holder, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller