Sunflower AirTag holder

Açıklama

This holder with the shape of a sunflower is a cute way to use your Apple AirTag! We designed it so that both the front and back have openings so you can still replace the AirTag's battery without disassembling the print. Also, when you ping your AirTag no sound is blocked by the print. It also has a small hole so you can use it with a cord or keychain. Parts description This printable model is made of 4 parts: Casing: this is the central part, the thick ring with a partially-closed wall on one side. Inner ring: a thin ring used as part of the locking mechanism for the petals. This part must be printed using the “Detect thin walls” option, or equivalent in your slicer. We also suggest you use a 1 mm width brim around it for better stability. Lid: it closes the casing, holding the AirTag into place. Petals: they are locked in place around the casing (follow the instructions below) and serve as a holding point to attach a cord or keychain. There are two versions of the petals. The ones in the pictures are the “short” petals. Additionally, you will need a small piece of ⌀ 1.75 mm filament. Cut one end squared (a straight, flat cut, not the usual 45° you would use to insert the filament in the extruder gear). Assembly instructions Place the casing on a flat surface with the larger opening facing down. Slide the petals into place, with the flat part facing down. There are three small holes around the petals and another set of holes in the casing. Make sure those are aligned. The…