Retraction Test

Retraction Test

Ücretsiz STL Diğer
  • 23 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Hi everyone, this is my model of a Retraction Test in which you can check Retraction and change it every 5mm You can also check precision by measuring the small cilinders, one is 4mm, the other 3mm. Last but not least you can check if your x and y axis belts are well tuned. INSTRUCTIONS -To change retracton on the same print on Cura go on top left, Extension -> Post processing -> Modify G-code -On the tab select Add a script -> Change at Z -Select if you prefere to change at height (mm) or at layer number) -At the end select the last voice: Change retraction. -Start by a fixed speed and change retraction from 1 to 6 or from 0 to 5 -Print another one with same setting BUT change retraction speed. ENJOY

Bu model hakkında

Retraction Test, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller