Halot One Creality resin tank

Halot One Creality resin tank

Ücretsiz STL Araçlar
  • 22 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

I drew the VAT of the Halot One from Créality in order to have some for different resins. I planned to mount the FEP mounting plate with 3.5 x 15 mm Phillips head wood screws. The mounting on the Halot One is done with M5 x 40 hex screws with a nut positioned against the hex head. You insert the screw with its nut into the grip button, glued with cyanoacrylate glue. Add a washer of 5 for the assembly. This resin stocking works very well. I just made one in gray with a FEP. Very handy!

Bu model hakkında

Halot One Creality resin tank, Cults3D topluluğunda paylaşılan ücretsiz bir Araçlar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller