RaMRaL

Açıklama

RaMRaL?? RaMRaL stands for Rasberry-Mega-Ramps-LCD and is my version of a case for the four components that will look good on any desktop. I'm still waiting for the parts but since I used some models that should be correct it should fit just fine. A warning for RPi3 users I got a comment that the power leds on a RPI3 have moved and might get damaged from the rear support closest to the power socket as in this image: (http://i.imgur.com/RSVYlxv.png). I'm working on a new version that fixes this but meanwhile you can use a dremel and just sand it down 3mm Important notes The Raspberry is supposed to be powered on the GPIO 5V pin instead of the micro usb to avoid cluttering the side with useless cables. Either take the 5v from one of the servo connections on the RAMPS or glue a 5V voltage regulator to the side of the case. Apparently there is 2 versions of the 12864 LCD controller and the one I draw this for is the version with the rotary knob in the middle. I'm working on the other version to with the knob furthest to the right side. Updates Update 1: Added new version of the lid and the body that supports the LCD from reprapdiscounts (http://www.reprapdiscount.com/home/34-full-graphic-smart-lcd-controller.html). The difference is that this LCD only have one button and the rotary knob is to the right. The bottom of the LCD is also lower on this version so the body file needs to be re-downloaded to according to what LCD you are using. Update 2: Added step files to for everyone…