The Crystal Maw - 3DGeex

Açıklama

This is The Crystal Maw Dice Tower. I wanted to create a new dice tower and, as always, wanted it to have a few tricks up its sleeve. While there are quite a few skull-themed dice towers out there, I’m really happy with how this one turned out! It’s completely multi-part, so no AMS is required here. It’s split into two parts connected by magnets, and the back section includes a secret dice compartment where you can store your dice. You’ll need eight 12mm x 2mm magnets for the skull parts. The Crystal Island is optional but really adds a lot to the visual feel—I’m especially happy with how this part came out! Printing: Both skull parts require supports – I recommend tree/organic supports where needed. All other parts do not require supports. The back skull has two versions: Crystal and Non-Crystal. You can print the small crystal separately and glue it to the top, it adds a great finishing touch! For the Crystal Base, pause the print mid-way to swap filament colors for the crystals. Notes: The Skull_Front has two versions: One with smaller openings and one with larger. This was part of my testing, but I decided to include both. Use Skull_Front_Larger_Holes.stl if your dice are over 20mm in size (they probably are). My Print Settings: Layer Height: 0.2 Supports: Tree Walls: 2 Infill: 5% If you want to get access to all my models or sell my prints commercially,you can join my Thangs: https://******.com/designer/3DGeex And a kind request, Please help supporting the work of all…