Parametric Servo Bracket

Parametric Servo Bracket

Ücretsiz STL Düzenleyici ve Saklama
  • 21 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

derived from this... http://www.thingiverse.com/thing:13850 which was derived from http://www.thingiverse.com/thing:9915 existing parametric variables servo width - servo_width added and/or fixed parametric variables for; servo length - servo_length base width - base_width : the width of the base plate of the bracket base length - base_length : the length of the base plate of the bracket base thickness - base_thickness : the thickness of the base plate of the bracket hole distance - hole_distance : distance between servo mounting hole hole diameter - hole_diameter : servo mounting holes sizes improved the math for positioning the mounting holes; made the holes a fixed distance from outside edge of the base plate rather than the center. made the servo_width variable an argument to the 'arm' module

Bu model hakkında

Parametric Servo Bracket, Cults3D topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller