ELFA-Compatible 2020 Shelf Mount

ELFA-Compatible 2020 Shelf Mount

Ücretsiz STL Gadget ve Aksesuar
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This mounts a piece of 2020 aluminum extrusion to the front of an ELFA solid shelf (or any other 3/4" melamine shelf) without putting holes in the shelving. A small piece of blue-tak can be put into the holes on the bottom to prevent the brackets from sliding forward off the shelf. Printing with supports is recommended. The hole on the front is sized for an M4 machine screw, for use with a hammer nut to prevent the 2020 from sliding within the bracket.

Bu model hakkında

ELFA-Compatible 2020 Shelf Mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller