NFC Smart Ring

Açıklama

A ring with a design that will allow you to place a nfc tag in it. Place the piece vertically on build plate (supports under the actual ring) and use these settings: - Print with layer height 0.2mm - Pause print at layer 140 - Insert a folded NFC tag (link below) - Resume print You can use a common commercial NFC tag of 25mm (like these ones https://www.amazon.com/OBO-Compatible-Sticker-High-Capacity-Enabled/dp/B075RXBVKM/ref=sr144?dchild=1&keywords=nfc+tag&qid=1616150889&sr=8-44). They have to be the flexible sticker ones, not the solid ones. You can of course resize the ring but you will need to change the pause layer number. Don't scale it too much smaller or the tag will not fit in it. You can program it with your smartphone and the functions you can setup are countless. In the video you will see a tests I did in order to make it open my Insta profile. For any question, feel free to contact me here or on my social ;) FIVERRCULTS It can be used within companies to speed up some tasks such as wifi connection, deviced interaction, webpage opening, door access and so on.