Filament Spool Roll

Filament Spool Roll

Ücretsiz STL Diğer
  • 12 görüntülenme

Bu model Creality Cloud üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Creality Cloud üzerinde görüntüle ↗

Açıklama

This is a replacement for the original filament spool roll on the Ender 3 Pro.This assembly includes two shafts, a frame, a pulley drum, a bolt, and a guide bracket.3 QTY of 8mmx22mmx7mm ball bearings and 2 QTY of 5mm bolts and nuts are required for the assembly.Its recommended to print shims if the pulley drum does not rotate freely.Its recommended to slightly bend the Ender 3 metal bracket towards the front of the printer to keep the spool from rolling off. Shimming is another solution by placing shims under the ball bearing near the tail end of the 3D printer.The recommended settings:- Material: PLA- Filament Supplier: Overture- 3D Printer: Ender 3 Pro- Temperature: 205C (varies)- Infill: 20%- Fan: 100%- No supports needed

Bu model hakkında

Filament Spool Roll, Creality Cloud topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Creality Cloud üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller