Concealed Tracker for Teal Sport Drone
- 21 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
The project proposes concealing a GPS tracker inside the top cover of the Teal™ Sport drone. There are several advantages of having an additional tracker independent from the drone electronics. Firstly, its power is independent from the drone's battery supply, GPS tracking abilities won't go idle in case of running out of power while piloting. Also, in case of theft, a concealed tracker would prevent the drone from being untrackable in case the electronics are disconnected from its power supply or turned off. The tracker attaches to the inner side of the top cover. Note: The proposal is modeled after the Tile™ Mate tracker and its dimensions but can be altered for any other brand or proprietary electronics from Teal™. The Tile™ Mate was used for representation purposes and proof of concept and no copyright infringement is intended.
Bu model hakkında
Concealed Tracker for Teal Sport Drone, Cults3D topluluğunda paylaşılan ücretsiz bir Araçlar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.