Small ball-head tripod camera mount

Açıklama

A small tripod ball head, with 1/4" UNC tripod fitting, thread either printed in the STL or as a recess for a UNC nut. The base is 34mm dia , height: 50mm. Also a version that can be screwed to a wooden plank/base etc (2x 2mm dia. 50mm spaced). + mounts, for 1/4" UNC screw to camera, cold shoe or M10 microphone attachment. Parts: small ball head base (threaded 1-4inch UNC) .stl small ball head base (for tripod via UNC nut) .stl small ball head base (for wood or wall mount) .stl small ball head side wall clamp v1.stl.stl small ball with camera plate (1-4inch UNC).stl small ball with cold shoe.stl small Ball for 1-4 UNC bolt.stl 1/4" UNC bolt (35/40mm).stl small ball with M10 mic holder.stl GoProThmScrwNUT-M5-short 12mm (v1.3c).stl GoProThmScrwNUT-M5-25mm (v1.3c).stl 8mm thick thumbwheel 1-4 UNC v1.stl extras required: side screw: M5 bolt 34-40mm with an M5 wing nut (or use the included GoProThmScrwNUT.STL). 1/4" UNC camera mounting screw (print included for example). Aside I found the screw threads still need finishing with taps/dies, although the UNC screw prints almost perfectly @ 0.12mm layers on the ElegooCC.