Stalagbite! Insert for Base Game and Deeper Caverns

Açıklama

This is a (massive) insert for Stalagbite! and the expansion Deeper Caverns. The lids are magnetically attached to the boxes. They should stay on the boxes even without magnets due to the recesses, but I recommend using them anyway. You will need 64 round magnets measuring 5 mm x 2 mm. The holes are designed at 5.1 mm to compensate for filament/printer tolerances. They may be pressed in place, but I recommend gluing them in just to be on the safe side. According to Creality Print (K1C) Print Time: Approx. 1 day, 14 hours Filament used: 1.2 kg Largest Part: 218mm Attention! Apart from the card trays and the map tile tray, there is no text on the parts. This was just a test, but I have removed it. If you want to label the boxes, it is better to do so within the slicer.