Pineapple coasters

Açıklama

Would you like to support my work? :) Check out my full catalogue (https://wonderl.ink/@gazzaladra) with exclusives, early access and commercial licenses. A 3d scanned baby pineapple sliced into a decorative coaster set for your kitchen table. The design consists of 8 coasters, the top and bottom all connected via a rod to keep them in place. The coasters have numbers at the bottom and can only be inserted in one direction for easier use. Single and multi-color printing models are included as STL and 3MF! They work with all current and usual multi color setups. The design and 3MF are carefully optimized to produce as little waste as possible. Size assembled: 124 x 131x 234 mm While the design is easy to print with no support, please be aware that the top with the leaves is a complex part with thin elements. Please don’t drop it! Print settings Required build volume: 140 x 140 x 150 Material usage multi color total including waste: 590 grams Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Infill: 20% Build plate adhesion type: none