Pixel LED Mini Tree

Pixel LED Mini Tree

Ücretsiz STL Minyatürler
  • 23 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

Mini tree for Christams lights using 12mm pixels.The Mickey topper uses 20 pixels, if you use 5x boscoyo strips of 16 LEDs you should be able to use a 100 led strand with 1x splice up to the topper. I used 17/strip and bought the custom 105 pixel strands for the Boscoyo mini trees.Mickey topper fits 1/2" PVC if desired, otherwise attach to the tree top using the pin.Threaded insert and base fit 3/4" PVC and will allow you to tension your strands.No supports required. Print 1x base, 1x top, 1x threaded insert, 1x Mickey and 1x pin for each tree.1/4" J bolts will fit in the top and 8mm bolts with washers in the bottom to secure Boscoyo strip

Bu model hakkında

Pixel LED Mini Tree, Thingiverse topluluğunda paylaşılan ücretsiz bir Minyatürler 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller