Multi Beer keg Single Tap

Multi Beer keg Single Tap

Ücretsiz STL Diğer
  • 14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

A cheap system that has 4 kegs attached to one tap, the beer is selected via touch screen Set a list of all beer styles, RTD or similar beverage via SD Card using plain text file, Then on screen you can go into settings select the beer for that tap, rotate the bezel to adjust the ABV and set the Litres per keg, kick back and enjoy. There is a pulse slider on screen so that you can finetune the flow meter accuracy. Keeping the single feed line short ensures that there is minimal amount of the previous beverage when changing, although if changing from a lager to hazy it doesnt really make much different. Run the system at 10-15 PSI and a tap with a Flow controlstops any foaming issues. This is a great system for people that dont have room for a 4 tap setup. And it saves on setup costs. https://youtube.com/shorts/Q6Hiqld6W5s

Bu model hakkında

Multi Beer keg Single Tap, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller