Simple Hinged Case

Açıklama

Simple Hinged Case/Toolbox Suitable for storing batteries (AA, AAA, etc), screws, nuts, electronic components, etc. Dimensions: Length = 83mm Width = 63mm (+7mm hinge+lock) Height = 25mm The model contains two parts (left & right) that need to be attached to one another through the hinge (only need to gently push one part of the hinge into the corresponding socket of the other part). !!! The "right" side can be printed with or without the locking clamp. The locking clamp is very fragile and can break if printed vertically (in one piece). So, I recommend printing the part without it (simplecasewithoutlocking_clamp) it and then printing and glueing the locking clamp separately, in horizontal. I recommend using a glue that is a bit slower than superglue, to have time to position/align the parts well enough. I personally use plastic glue from Bison and it does its job pretty well for these things. !There are two versions (V1 & V2), the only difference is that V2 has conical "stand feet"