Breath Builder. Breath Builder. Breath Builder.
- 14 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
The Breath Builder is used to exercise breathing. It is a device widely used by wind musicians. It has 4 outputs, one of them is dedicated to the tube or hose that connects to our mouth and the other three outputs are used to increase or decrease the resistance of the exercise. The exercise consists of trying to keep a ball (Table Tennis Ball that goes inside the tube) at the top, making an inhalation followed by an exhalation. The resistance will increase as we increase our capacity. It is recommended to use metronome for a correct exercise. The model is designed in 3 pieces: *The upper piece that has the holes and the connector of the sleeve. It is glued to the tubular piece (with adhesive for plastics). *The Tubular piece that has a wider extemo to improve adhesion to the printing bed, which is then glued to the upper piece. *The lower piece or lid, which is placed under pressure on the tubular piece, which allows to open the device to place the table tennis ball inside and for later cleaning of the same. The hose to be connected must be 1/2' or 12 mm internal diameter, also with a length of 15 cm it works. If you search for Breath Builder on Youtube there are many videos explaining how to use it.
Bu model hakkında
Breath Builder. Breath Builder. Breath Builder., Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.