FLSUN V400 - Speeder Pad Top Mount

Açıklama

General: I wanted the speeder pad on top WIP - Works but I might make some adjustments (see pictures) 3 parts that can be printed without support Requires a M5 threaded rod (90mm) Please clean the insertion holes with a knife or similar as the parts fit tightly into each other I wanted to have friction between the parts so that the pad sits tightly on the holder Assembly: Please ensure that the holes are clear. The tip broke off the first time I fitted it. Insert the rod into the lower part with a little force for more stability Optional: You can attach/screw on the small cap to the rod beforehand so that the whole piece is closed Before assembling the lower and upper part, you can sand the tip with some sandpaper I mounted the part with 2 screws on the printer on the right (see pictures) Inserting the pad Connect the cable I might work on a slightly nicer and more robust version.