BRINKO Rob Collection

Açıklama

Name: Brinko Rob CollectionCategory: Brinko CornerDimensions: 1,2.4.6.14Recommended material: PLA, PETGPrinting method: FFFRequired supports: NORecommended configuration: 15% infill, 0.22mm layer heightDescription:Part NamingThere's a straightforward naming convention for files and parts. This can help you understand the type of each part.bik-bd-sm ^---- subtype if necessary ^------------------ part type ^---------------------- main group or category of the partGroupsThere are several main groups, with the base group being "bk," which stands for BRINKO.bik: BRINKO base piece of the system; whole units with 2 dimensions and a height of 1.pan: Panels; pieces with half the height of the base piece, having 2 dimensions.bem: Bars; pieces with half the height of the base piece, having 1 dimension.eck: Corners; pieces with dimensions 1x1x1 that connect 3 points.rob: Round bars that join edges and have a rounded finish; 1-dimensional.sen: Sensors.pin: Connector pieces.TypesThe type of each piece indicates what type of beam, sensor, or conductor it is.an: Form with a defined angle.bd: Plate (e.g., Arduino, ESP32, etc.).gr: Gear.I, H: Beam frame with specific shapes.sen: Box for sensors, modules, or other independent electrical components.mot: Box for motors.ax: Hole or axle.tr: Caterpillar chain piece.SubtypesSome pieces have defined subtypes.sm: Smooth or flat version without too many holes.ho: Hollow inside.ValueThe value is kept as short as possible and represents the specific…