CR10 V2 BLTouch Centred Bracket

Açıklama

This is the last "Version 6" and fixes the issue of the weak point snapping - NOTE PRINT WITH 4 WALLS @ 0.2 Layer Height or less for stronger results After upgrading your Creality CR-10 V2/V3 with a BLTouch you'll find you can't reach the left most side of the bed. So I decided to make this bracket to get the BLTouch closer to the X centre line when probing. I Have Included 2 HEX files to work with this offset bracket 1 is for standard Bowden Setup machine came with the other is for the Direct Drive Titan E3D extruder setup. Please note for the Direct drive HEX I have taken care of the motor reverse issue and the E steps for the direct drive. Basically Print the bracket and install the HEX update I have provided and all you need to do after the upgrade is INITIALIZE EEPROM in the lcd menu and then work out your probe Z offset (around -1.95 is a good start) Both Hex have the following in common 3 x 3 Grid Probing (9 points) GAMES Menu ON Filament Runout Sensor ON Fast grid probing mode ON Games Included Brickout, Space Invader and Snake..... ENJOY To play the games go to ABOUT PRINTER -> (scroll all the way down past all the spaces) GAMES https://youtu.be/qMfQblEgZyk