Under-Printer Paper Shelf

Under-Printer Paper Shelf

Ücretsiz STL Diğer
  • 20 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Designed this to make my life a little easier. Holds one ream of printer paper below the printer. Supplies: 12 x quarter inch wooden (or metal if preferred) dowel rod. 14 inches long 2 x printed frame You may have to drill out the holes, depending on how well your 3d printer is calibrated, or how accurate the dowel size is. I designed the holes for the dowels at 1/4 inch, but had to drill them at 17/64 to get them to fit the wooden dowel rods that were supposedly 1/4 inch.

Bu model hakkında

Under-Printer Paper Shelf, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller