Fully Customizable Foot

Açıklama

Having trouble finding your feet? The furniture kind, that is! Whether you're replacing a missing foot or you need a complete set, you can now print your own with our fully customizable foot design. This part was designed several months ago to replace a missing foot on a footstool. We were unsure how well it would last, but it is still going strong, despite regular use, so we are sharing it for you to try. This design is completely free and shared under a permissive license. Your support (https://codeandmake.com/support) is hugely appreciated. OpenSCAD Customizer Options This design has the following Customizer options: Foot Foot_Top_Diameter - The diameter of the top of the foot Foot_Bottom_Diameter - The diameter of the bottom of the foot Foot_Bottom_Bevel_Radius - The bevel radius of the bottom of the foot Foot_Height - The overall height of the foot Screws Screw_Hole_Diameter - Screw hole diameter Screw_Head_Hole_Diameter - Screw head hole diameter Screw_Material_Thickness - Material thickness (between screw head and base) Screw_Countersink_Angle - Screw countersink angle (82 and 90 are common) Material We recommend printing this in a durable filament, such as ABS or nylon. Versions 1.1 (4 May 2021) - Increased the upper limit of Screw_Material_Thickness to 80mm 1.0 (1 Apr 2021) - Initial version Printing Recommended slicer settings: Resolution: 0.1mm - 0.2mm Infill: ~50% - ~80% recommended. Supports: Should not be required. Rafts: Not required, unless you experience…