Runcam2 Mount

Runcam2 Mount

Ücretsiz STL Gadget ve Aksesuar
  • 18 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

The stock Runcam2 mount is decent, but if you want to have the mount semi permanently installed it's near impossible to get to the clip on the under side of the case to release the camera. This mount allows you to leave the mount in place and easily strap in the camera using the velcro strap that comes with the cam. All vent holes are open, access to USB port and all buttons, and the strap crosses up front so it's not covering the LED indicators like would normally be if you just velcro the camera in place around it's middle.

Bu model hakkında

Runcam2 Mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller