Vase 387

Ücretsiz STL Sanat ve Heykel

21 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

This vase can be printed in spiral vase mode but it's not required to print this way. In Cura, spiralize outer contour. It can be printed in normal mode by unchecking spiralize outer contour, set walls to 1 or 2 or more and 0 top layers and 0% infill. The vase can be scaled in your slicer taller and wider to fit your needs. The vase in the photos has been scaled and is printed at 88% in the x and y axis and shows 89 mm wide and z is 100% at 112mm tall and print time was 1 hours 52 minutes at 40 mm/s. Can be printed in any color pla. Printing the stl file at 100% will work just fine.

Bu model hakkında

Vase 387, Cults3D topluluğunda paylaşılan ücretsiz bir Sanat ve Heykel 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.