Terence Hill bust - No Support Cut

Terence Hill bust - No Support Cut

Ücretsiz STL Sanat ve Heykel
  • 9 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

The model is split into segment to print it without support. It is increased to a height of 130mm total. The sholder are cut back a bit to give it a better print angle of 55°. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6 peaces of 1.75mm filament which are 13mm long. Therefore i do not suggest to scale the model. Holes for additional FilaPins are added to the base for display stand. Here is my design: https://www.thingiverse.com/thing:3345152 If you like to crate your own stand use the FilaPin.stl to add the necessary holes to your model. Credits go to IronButterFly for the amazing sculpture of Terence Hill: https://www.thingiverse.com/thing:3046689

Bu model hakkında

Terence Hill bust - No Support Cut, Cults3D topluluğunda paylaşılan ücretsiz bir Sanat ve Heykel 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller