UM2 Bondtech QR Motor Mount

UM2 Bondtech QR Motor Mount

Ücretsiz STL Gadget ve Aksesuar
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

I grew really tired of the original UM2 Bondtech motor mount having it's nuts slip out over time. So I designed my own. Normally I would use metric as the rest of this printer is metric. But this uses Imperial screws and nuts as they provide a bigger surface area to hold the mount together without trying to get a nut and washer inside the mount base. This assumes you have the QR Ultimaker 2 Kit: https://www.bondtech.se/en/product/qr-ultimaker-2-kit/ Non-Printed Part List Two 6-32 screws of 3/4 inch long Two 6-32 nuts (not lock nuts)

Bu model hakkında

UM2 Bondtech QR Motor Mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller