Faro de Caja de Muertos

Faro de Caja de Muertos

Ücretsiz STL Diğer
  • 14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This light-station is on the summit and in the center of Caja de Muertos Island. The light is fixed white, varied by a white flash every three minutes, is of the third order, is 297 feet above high water, and is visible for 18 miles. It is shown from a cylindrical tower on the center of a one-story, flat-roofed dwelling, which is gray with white trimmings. The tower is 41 feet high from its base. The light was begun in 1882 and was finished in 1885 by the Spanish, at a cost of 39,412 pesos, and it is used as a guide along the southerly coast of Porto Rico. The lamp and clockwork of the lens were repaired, a new cover was fitted to the cistern, the windows were repaired, the walk around the building and exterior and interior walls were cemented and the lens clock was repaired. The Lorraine Cross "T"-shaped Caja de Muertos Island Lighthouse is unique amongst the lighthouses of Puerto Rico. The main entrance is located in the middle of the vertical portion of the "T", which runs east-west, and opens into a small corridor across from which is located the entrance to the base of the tower. Positioned on the opposite side of the tower is an oil room, while to the right of the tower as one enters the lighthouse is an engineer’s room and to the left of the tower a supply room. In the top and bottom portions of the I, which run north-south, are found two keeper’s apartments, each consisting of a living room, two bedrooms, a kitchen/dining room, and a bathroom. On August 11, the eye…

Bu model hakkında

Faro de Caja de Muertos, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller