12 Gauge Shotgun Flashlight Mount

12 Gauge Shotgun Flashlight Mount

Ücretsiz STL Gadget ve Aksesuar
  • 12 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This basic, simple double clamp is designed to mount an AMAsky flashlight to a Mossberg Maverick Model 88 12 gauge shotgun. The flashlight diameter is 21mm and the barrel of the shotgun is 22.5mm. Any shotgun or flashlight with those measurement should work. You will need four m3-0.50x12 machine screws and four m3-0.50 hex nuts to bolt the clamp together. There are registration marks on the two clamps that match those on the center piece due to the ever so slight difference in sizes between the two sets.

Bu model hakkında

12 Gauge Shotgun Flashlight Mount, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller