Printed Solid Lulzbot Mini Enclosure Bracket for LCD

Ücretsiz STL Minyatürler

16 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

If you have the Lulzbot Mini Enclosure by Printed Solid and have the new LCD control panel from Lulzbot then this new right bracket will allow you to mount the LCD and the enclosure together. Remove the existing bracket and replace it with this one. Using the same M3-40 bolt it will go through the bracket and through the frame of the printer and then thread into the LCD mount bracket. Go slow and be careful. Unfortunately you will be going through two threads, the one on the frame and the one on the LCD mount. So go slow and if it takes force to turn the screw you might be double threading the LCD bracket or pushing the heat insert out of the LCD bracket. You will need to remove The stiffener on the top of the enclosure part "H"

Bu model hakkında

Printed Solid Lulzbot Mini Enclosure Bracket for LCD, Cults3D topluluğunda paylaşılan ücretsiz bir Minyatürler 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.