GoPro panorama robot

GoPro panorama robot

Ücretsiz STL Karakterler
  • 27 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This is the structure for a panorama robot using a GoPro Hero camera. Uses two R/C servo motors. The tilt servo (the top one) can be a regular cheap servo. For the bottom pan servo you need one that can rotate 360 degrees (for regular servos the range is limited to about 180 degrees). These are a little difficult to get by, I used this one: http://www.pololu.com/catalog/product/522

Bu model hakkında

GoPro panorama robot, Cults3D topluluğunda paylaşılan ücretsiz bir Karakterler 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller