Ocean / Dive Cock Ring Silicone Mold

Açıklama

Ocean / Dive Cock Ring Prints easy with no supports or brims needed. A nod to the apple watch ocean band, this ring is a series of open tubes connected side by side for a soft elastic fit which is comfortable to wear for extended periods. I have also included a solid core version for those wanting a more rugged, less elastic ring. The mold in two styles, hollow core and solid core, is available in two widths, 18mm (3/4") and 25mm (1") and ranges in diameter from 40mm to 55mm with 5mm increments. If you need a bigger or smaller size, you can resize / scale the mold. All parts must be kept at the same ratios or they will not fit together correctly. If you need a different size and resizing is not working for you, please let me know and I will create a mold set for you. The Mold I found that the mold is best printed in PLA for smoothness, but PETG works as well if you want a stronger mold for many repeat uses. I printed this on a Bambu PS1 using a .20mm layer height with a .4 nozzle. If you want your final product to be smoother, try a smaller layer height and/or use adaptive + smooth layer height and adjust the layers to be thinner at the front and back curves. Note that for the hollow core model, I printed the mold using .20 Strength setting so the rods that create the hollow cores are stronger and less likely to break over repeated use of the mold. You might want to consider using a release agent, like Mann Release Technologies Ease Release 200 (https://amzn.to/3AAWHuv)…