Ribcage Bow

Açıklama

A haunting fusion of anatomy and weaponry — the Ribcage Bow looks as though it was carved from the bones of an ancient beast. Every curve and ridge mimics skeletal form, blending organic horror and gothic design into a striking fantasy prop. Ideal for cosplay builds, wall display pieces, or miniature fantasy dioramas, this detailed 3D model captures the essence of dark craftsmanship. 📏 Measuring Instructions Measure the desired full bow height for your cosplay or display (typical prop bows range 60–120 cm). Scale uniformly in your slicer: 100–120% for life-size cosplay. 70–80% for compact display models. 30–50% for tabletop or miniature terrain. Keep minimum wall thickness ≥ 2.5 mm for strength. Depending on the size you choose, the connectors may gone loose or tight. File if tight. If loose, just use viscous epoxy. 💡 Tip: If printing at large scale, cut the model into sections using your slicer’s “split” function to fit your printer bed, then pin and glue together after printing. ⚙️ Printing Instructions Supports: Required (under ribs and inner curves). Layer height: 0.12–0.2 mm for detail. Infill: 15–25%. Material: PLA+ or PETG for props; resin for miniature scale. Orientation: Print vertically or diagonally for best curvature preservation. 🎨 Finishing Tips Prime in black or bone white, then dry-brush with aged ivory, ash gray, or bronze. Add depth with brown and crimson washes for a realistic decayed look. Highlight carvings with metallic or pearl pigments for an…