Gunpla Multiconnect Mount

Açıklama

Remixed a wall mount for Gundam models. I added multiple connector points, slimmed it down, shortened it, and added a Multiconnect rail to the back. Compatible with both Honeycomb Storage Wall and Multiboard, using Multiconnect V2. I originally oriented my wall to match GunplaMark's arm mounts, but I could never get them to be tight enough or to ratchet properly, so for some of my kits I'm using this design instead. I didn't want to move my HSW around at this point so I made a bunch of different designs, one that's specifically for this orientation and two others that are more general. I printed mine all in PETG for minimal shrinkage and to match what I used for my storage walls. If you print in PLA the mounting holes for the stand attachments might be too tight, so watch out for that. The Mounts: The mounts all print the same way. Stand surface down with no supports, so the side your model will sit on will be on the bed. "Short-GM” needs THREE multiconnect inserts, in a triangle shape. This is to keep the stand from spinning. See the photos for what this looks like. Gunpla Display Arm for Honeycomb Storage Wall by GunplaMark | Download free STL model | Printables.com “Short” is the same as short but can sit on two multiconnects aligned vertically. I haven't tried this one myself yet. “Long” sits on two multiconnects. I tend to add one multiconnect at the top and one at the bottom to keep it from rotating. The Pegs: The holes are as the original design, and fit the 7.35mm…