BRINKO Bem Collection

Açıklama

Name: Brinko Bem Collection Category: Brinko Bar Dimensions: 1,2,3,4,5,6,8,10,12 Recommended material: PLA, PETG Printing method: FFF Required supports: NO Recommended configuration: 15% infill, 0.22mm layer height Description: PART NAMING There's a straightforward naming convention for files and parts. This can help you understand the type of each part. bik-bd-sm ^---- subtype if necessary ^------------------ part type ^---------------------- main group or category of the part ``` GROUPS There are several main groups, with the base group being "bk," which stands for BRINKO. bik: BRINKO base piece of the system; whole units with 2 dimensions and a height of 1. pan: Panels; pieces with half the height of the base piece, having 2 dimensions. bem: Bars; pieces with half the height of the base piece, having 1 dimension. eck: Corners; pieces with dimensions 1x1x1 that connect 3 points. rob: Round bars that join edges and have a rounded finish; 1-dimensional. sen: Sensors. pin: Connector pieces. TYPES The type of each piece indicates what type of beam, sensor, or conductor it is. -an: Form with a defined angle. -bd: Plate (e.g., Arduino, ESP32, etc.). -gr: Gear. -I, H: Beam frame with specific shapes. -sen: Box for sensors, modules, or other independent electrical components. -mot: Box for motors. -ax: Hole or axle. -tr: Caterpillar chain piece. SUBTYPES Some pieces have defined subtypes. sm: Smooth or flat version without too many holes. ho: Hollow inside. VALUE The value is kept…