X Shaped Test Print - First layer Optimization

Açıklama

🛠️ Ultimate "X" Test Print: First Layer Optimization 🚀Achieve the perfect first layer squish and eliminate printing frustrations before they start! This ultra-fast, filament-saving calibration tool is your secret weapon for diagnosing and fixing bed leveling issues in minutes.💡 Why This Design is a Must-Have:⏱️ Lightning Fast: Prints in under 3 minutes on high-speed printers like the Creality K2.🌱 Ultra-Efficient: Uses a mere 1.42g of filament—stop wasting plastic on massive calibration squares!📐 Fully Customizable: Easily stretchable in your slicer to match any print bed size. (Just remember to only resize the X and Y axes and keep it as a single layer!)🔍 The Ultimate First-Layer Diagnostic GuideDon't guess what's wrong with your printer—let the "X" Test Print tell you exactly what to fix. Run this print and use the symptoms below to perfectly tune your machine.🚫 Symptom 1: Too Far From the Bed (Not Enough Squish)What you see: * Individual lines look like round cylinders instead of flat ribbons.Visible gaps or spaces between the printed lines.The plastic doesn't stick to the build plate and easily drags around or peels off.⚡ The Solution: Your nozzle needs to be closer. Lower your Z-Offset by adjusting it further into the negative figures (e.g., move from -1.20 to -1.25) until the lines fuse seamlessly.💥 Symptom 2: Too Close to the Bed (Too Much Squish)What you see:The surface of the "X" feels rough, ridged, or looks like it has "plowed" waves.The…