AkuzaDemonSlayer2Flat

Açıklama

Project: AkuzaDemonSlayer2Flat.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120.89x200mm in sizeThe model is 3.52mm thick.The region from 3.04 to 3.52mm could have a Height Range Modifier to minimize print time.#080a0d PLA PolyLite Black Transmission Distance: 0.3#d22332 PLA+ Sunlu Red Transmission Distance: 6#0f52ba PLA+ Sunlu Blue Grey Transmission Distance: 3#ffffff PLA+ Sunlu White Transmission Distance: 5#ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5#ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5#e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions:You do not set Layer Swaps in the slicer. Instead each color slider is represented by an STL file.The file is named with the filament at the end so it's easy to assign them in the slicer.Load all of the STLs at once and your slicer will ask if it is a Multi-part model. Select yes.Load up your filaments, then assign them in the Object view tab by clicking on the colored boxand either pressing the number of the filament or clicking a second time and selecting from the dropdown.FlatForge Printing Instructions:FlatForge prints REQUIRE automatic Filament Swapping. There can be as many swaps per layer as you have sliders.If you have selected Double Sided or Face Down the model is already rotated face downand there is a transparent layer of your Base Layer thickness on the bottom.Since this is a full layer, you may pause…