Wire spool collection

Açıklama

This is a wire spool with a resistance mechanism; it won't unwind on its own or spin out of control if you pull too hard on the cable.The parts can be glued together, and no other fasteners are needed.You can always remove the spool from the holder to take it with you.I've added a base that screws to the wall; it holds 7 15mm spools.Label:The label is blank, you can manually enter the desired text/wire size using the Silcer software itself.Spool:the disk left and right have a flat side this side you have to glue. The side with the raised edge is the outside.holder:In the photo, I’ve marked the areas on the walls where glue can be applied. The pieces also snap together, so gluing isn’t necessary but is recommended.