沙发底挡板 Sofa Bottom Baffle

Açıklama

总是有小东西滚到沙发底下的缝隙里去，就设计了这个挡板。挡板模型分主要的拼接模块和调节长度的短版拼接模块，模块间通过销柱连接，最两端要安装带插销的挡片。封面图使用提供的3MF设置打印，长版和短板的模块都按需要的数量打印，两端的挡片要打印一组两个。这个模型没有特殊的结构，按自己的打印习惯切片就行，耗材根据自己的情况调整，对强度有需求的话建议提高填充比例。切片时，可根据自己的家具缝隙高度调整挡板的高度。安装方法：将立架依次排列，把插销扣入相邻的立架，最后在两侧装上挡片。使用后如有改进建议欢迎留言交流。Small items always roll into the gap under the sofa, so this baffle was designed.The baffle model consists of main splicing modules and shorter splicing modules for length adjustment. The modules are connected via pins, and both ends are fitted with stoppers that have built-in plugs.For the cover image, print using the provided 3MF settings. Print the required number of long and short modules, and print one set (two pieces) of the end stoppers. This model has no special structural requirements; simply slice it according to your usual printing preferences, adjust the filament as needed, and increase the infill density if higher strength is required. During slicing, you can adjust the baffle height according to the height of your furniture gap.Installation method: Arrange the upright modules in sequence, snap the pins into the adjacent modules, and finally attach the stoppers on both ends.If you have any suggestions for improvement after use, please feel free to leave a message to discuss.