Latching Curtain Clips – Small & Medium Tiebacks

Açıklama

A simple latching curtain clip designed to hold curtains back without knots, rubber bands, twist ties, or bulky curtain hardware.This design includes two sizes: small and medium. The small clip works best for lighter curtains or smaller gathered sections, while the medium clip is better for thicker fabric, fuller curtains, or a stronger hold.The clip wraps around the gathered curtain fabric and latches into place, keeping the curtain pulled back cleanly. It is a basic utility print, but one of those small practical things that makes a room feel less messy.Good for curtains, drapes, blackout curtains, closet curtains, RV curtains, shop curtains, craft room curtains, and temporary fabric tiebacks.Included:Small latching curtain clipMedium latching curtain clipReady-to-print 3MF print profileSTL model file for flexible printingThe included 3MF has multiple clips arranged on the build plate. You can print the full plate, or delete the extras and keep only the size and quantity you need.PETG is recommended because the latch area benefits from a little toughness and flex. PLA may work for light use, but it is more likely to snap if the latch is bent aggressively.Print flat on the build plate. No supports needed.For Print Settings Name, I’d change yours to:0.30mm PETG / 3 Walls / No SupportsFor Print Setting Description, paste this:Recommended print profile for the small and medium latching curtain clips.Print flat on the build plate as arranged in the file. No supports…