Qidi X-Max 3 Camera Mount

Qidi X-Max 3 Camera Mount

Ücretsiz STL Gadget ve Aksesuar
  • 28 görüntülenme

Bu model Creality Cloud üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Creality Cloud üzerinde görüntüle ↗

Açıklama

For those who can't get the official Qidi camera or don't want to spend that much on one, I'm sharing this model. It's similar to the original design, but I designed it from scratch. It's for a very common, low-cost camera like the one shown in the pictures. I printed it in PA, but it can be printed in ABS. Printing it in PLA or PETG isn't recommended because the Qidi camera's heat could soften these plastics.You'll also need a couple of 2mm x 5mm self-tapping screws.As a tip, I noticed that the camera chip tends to get hot, so I added a small aluminum heatsink.

Bu model hakkında

Qidi X-Max 3 Camera Mount, Creality Cloud topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Creality Cloud üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller