Formula 1 Figure

Açıklama

Formula 1 Logo SculptureThis Formula 1 logo is simply a straightforward sculpture with a decorative purpose. It has easy assembly, and all instructions are provided in this description.AssemblyTo assemble it, you will need to print all the pieces and some SuperGlue. The areas where glue should be applied are marked in the model file. Although the model includes holes for fitting, they are only intended to guide and show where to place each piece. If you find it a bit difficult, you can refer to the model's photographs.Remember to apply glue to all indicated parts, and if the pieces do not fit into the holes, you will need to sand them a little to fit correctly. In any case, you can always edit the XY hole parameter in the slicer, adding a value of 0.02 mm. This way, all holes will be wider.AppearanceTo make it as aligned as possible, you need a steady hand and patience. Guide yourself by the marked holes. If you want a glossy finish, use a spray primer if desired.Things to considerThis model was completely designed in Fusion. It is intended to be printed in PLA and PLA Tough +. Of course, you can modify it.Boost MeThanksBoost