Bottom Bracket Cable Guide for 1x Drivetrain

Bottom Bracket Cable Guide for 1x Drivetrain

Ücretsiz STL Düzenleyici ve Saklama
  • 29 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

A mountain bike bottom bracket cable guide for 1x drivetrains. Since it is common to do resto-mods on 90's mountain bikes by converting them to 1x drivetrains, I thought it was silly to use a double line guide on the bottom bracket shell. Since my was broken anyway, I came up with this part instead. You will go faster since you probably save 3 grams!I recommend printing with 100% infill using PETG (I used PETG-CF in the version shown in the pictures). Print it standing up on the long flat edge for best bed adhesion. I used supports in PLA on a multi-color machine, You might be able to print with no supports though.

Bu model hakkında

Bottom Bracket Cable Guide for 1x Drivetrain, Thingiverse topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller