Modular Modular FPV Drone Gate (Spiral & Single Setup)

Açıklama

This is a heavy-duty, interlocking modular ground anchor system designed to mount standard flexible rod poles for FPV drone racing gates. Whether you want to set up a classic single arched track gate or chain multiple units together to form a technical, spinning spiral/corkscrew gate tunnel, this mounting block provides the perfect foundation.The base features multiple heavy-duty mounting tabs (eyes) on the sides, perfectly sized to be securely pinned into grass or dirt using standard tent pegs / ground stakes (Heringe).FeaturesModular Interlocking Design: Designed with a smart male/female stacking and alignment logic (as shown in image_31fceb.png), allowing you to link anchors together or stagger them at precise angles to create spiraling gate patterns.Rock-Solid Stability: Equipped with 6 reinforced eyelets per unit to distribute tension and impact forces when pinned to the ground.Crash-Resistant Geometry: Built specifically to withstand high-velocity impacts from racing quads without ripping out of the ground.Important Slicing & Print Settings (Crucial for Durability!)FPV gates take a lot of abuse from high-speed crashes. To ensure the mounting tabs don't snap off, pay close attention to your bottom layer settings:Bottom Solid Layers / First Layers: Set to 100% Infill / High Wall Count for the first 3-5mm. Ensuring that the base tabs are printed completely solid is critical so that the eyelets do not shear off during a hard crash or when hammering in the ground…