FPV Camera Mount for FT Simple Cub r/c model airplane

FPV Camera Mount for FT Simple Cub r/c model airplane

Ücretsiz STL Gadget ve Aksesuar
  • 17 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

I just built a Simple Cub kit from Flite Test. The front windscreen was a pre-perforated hole for an FPV camera but I felt like it would be a bad idea to glue the camera directly to the windscreen.This is a plug for the hole while allows you to mount a 14mm FPV camera such as a runcam nano 2 at any angle you choose, adjustible.There is an opening under the camera to allow wires to pass through for camera (and in my case the VTX which is tucked under the wing.Printed in ABS. Could easily adapt for larger cameras such as a runcam micro or possibly larger. Message me for requests.[UPDATE Oct 1, 2021] Added 19mm version for larger FPV cameras

Bu model hakkında

FPV Camera Mount for FT Simple Cub r/c model airplane, Thingiverse topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller