Bracket The Spectrum Pi3 A+

Bracket The Spectrum Pi3 A+

Ücretsiz STL Düzenleyici ve Saklama
  • 24 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

Esta es una pieza de sujeción para la raspberry pi 3A+, para colocarla dentro del "The Spectrum" sin que se mueva.Corresponde al proyecto de Retromojones para poder usar el 'The Spectrum' en televisiones CRT de tubo, mediante ReplayOS y el RGB-Pi2.Podéis ver el proyecto completo en youtube: https://youtu.be/pBjsu5QKtTE?si=smh2lZFqAb0HHF8DThis is a mounting bracket for the Raspberry Pi 3A+, designed to fit it securely inside 'The Spectrum' without it moving around.It belongs to the Retromojones project, which enables using 'The Spectrum' on CRT tube TVs via ReplayOS and the RGB-Pi2.You can watch the full project on YouTube: https://youtu.be/pBjsu5QKtTE?si=smh2lZFqAb0HHF8D

Bu model hakkında

Bracket The Spectrum Pi3 A+, Thingiverse topluluğunda paylaşılan ücretsiz bir Düzenleyici ve Saklama 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller